Saltar al contenido Saltar a navegación Saltar al pie de página
INDIAN MOTORCYCLE
CENTRO DE AYUDA
04/03/2024

2015-2024 Scout Seat Removal and Installation

Follow the instructions for your bike model and year to remove the driver's seat on your Indian Scout motorcycle. 

Model Year 2022 to 2024 Scout Rogue/Scout Rogue Sixty

1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud (1). 

Scout Rogue seat removal

2. Lift the seat to disengage the seat base from the rear frame.

3. To reinstall the seat, make sure the tabs on the seat base fully engage the rear frame section, then press downward firmly at the front edge of the seat to snap the stud to the seat base grommet.

Model Year 2020 to 2024 Scout Models

To remove the seat:

1. Remove the bolts on the back of the seat (1) using the uni-tool included in the tool kit.

Bolts diagram

2. Remove the bolt behind the seat (2) using the included uni-tool.

Bolt diagram

3. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud (3). 

Seat mount stud diagram

To reinstall the seat, reverse the removal process.

Model Year 2018 to 2024 Scout Bobber/Scout Sixty and Model Year 2015-2019 Scout Models

To remove the driver's seat on Scout, Scout Bobber, Scout Bobber Sixty, Scout Sixty and Scout Bobber Twenty: 

1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud (1).
Seat

2. Lift the seat and pull it slightly rearward to disengage the seat base from the rear retainer (2).
Seat

3. To re-install the seat: Make sure the seat base engages the rear retainer (2) and then press downward firmly at the front edge of the seat to engage the stud to the seat base grommet. If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

Seat

Warning: If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

Model Year 2020 Scout Bobber Twenty and Scout 100th Anniversary Edition
Use caution to avoid contact with the fuel tank when removing the seat. To remove the seat:

1. Remove the two bolts (1) holding the seat to the seat frame using the uni-tool included in the tool kit.

Bolts diagram

2. Remove the four bolts (2) holding the seat frame to the bike.

Cover diagram

3. If trying to access the battery, remove the two bolts (3) holding the cover to the bike.

Bolts diagram

To reinstall the seat, reverse the removal process.

For more information about your motorcycle, consult your Owner's Manual.
For more seat options and accessory seat installation instructions, view the full line of Indian Motorcycle seats.
To find replacement parts, view the online parts catalog.

Unless noted, trademarks are the property of Indian Motorcycle International, LLC
© 2022 Indian Motorcycle International, LLC