Saltar al contenido Saltar a navegación Saltar al pie de página
INDIAN MOTORCYCLE
CENTRO DE AYUDA
01/24/2024

Pairing Your Phone to the 4.3" Touchscreen Display Powered by RIDE COMMAND

There are two ways to pair a Bluetooth® device to the 4.3" Touchscreen Display powered by RIDE COMMAND found on some 2019-2022 FTR models. 

Pairing Option 1
1.
 On your bike, press the Menu (center) button to the left of the display screen.

2. Navigate to either the PHONE screen or the MUSIC screen.

3. Select ADD DEVICE to bring up the pairing prompt.

4. On your phone, turn Bluetooth® ON, and put your device into pairing mode.

5. On the touchscreen display, select your device.

6. Verify that the numbers on your phone prompt match the numbers on the bike display.  

7. Accept the pairing prompt on your phone. Additional prompts to sync data on your phone such as messages, contacts, etc. may appear on your device.

Note: Be sure to allow the display access to your contacts and accept all other access requests if you wish to enable caller and message ID when operating the vehicle. 

Pairing Option 2 
A device may also be paired by navigating to the app tray using the center button on the gauge and then selecting SETTINGS.

1. On your bike, press the Menu (center) button to the left of the display screen.

2. Select SETTINGS > GENERAL (settings icon) > Bluetooth® Devices.

3. Select the Add Device button (+ Bluetooth® icon) to bring up the pairing prompt.

4. On your phone, turn Bluetooth® on and put your device into pairing mode.

5. On the touchscreen display, select your device.

6. Verify that the numbers on your phone prompt match the numbers on the bike display.  

7. Accept the pairing prompt on your phone. Additional prompts to sync data on your phone such as messages and contacts may appear on your device.

Note: Be sure to allow the display access to your contacts and accept all other access requests if you wish to enable caller and message ID when operating the vehicle. 

Forgetting a Device
To forget a device, navigate to SETTINGS > GENERAL (settings icon) > Bluetooth® Devices. Tap the three vertical dots and select FORGET. Confirm by pressing FORGET. 

Troubleshooting Tips
If you encounter issues during pairing, turn your bike off and repeat this procedure.

View the list of RIDE COMMAND-compatible devices. For information on pairing a headset, read Pairing Your SENA® headset
More information about RIDE COMMAND can be found in the Owner's Manual for your vehicle.
Visit the RIDE COMMAND website to create an account and update software/maps.
Not sure what you need? Check out the Guide to Indian Motorcycle Displays Powered by RIDE COMMAND.

Apple®, Apple Watch®, AIRPLAY®, AIRDROP®, Apple CARPLAY®, Siri® and iPhone® are registered trademarks of Apple Inc.
Bluetooth® is a registered trademark of Bluetooth Sig, Inc.
YouTube®, Google® and Android® are registered trademarks of Google LLC
iOS® is a registered trademark of Cisco Technology, Inc. 

SENA® is a registered trademark of SENA Technologies, Inc. 

Unless noted, trademarks are the property of Indian Motorcycle International, LLC
© 2022 Indian Motorcycle International, LLC

Palabra (s) clave video , ride , command , pair , how to , pairing , iphone , android , ftr , ,