Saltar al contenido Saltar a navegación Saltar al pie de página
INDIAN MOTORCYCLE
CENTRO DE AYUDA
11/30/2022

Pairing Your Phone to the 4" Round Touchscreen Display Powered by RIDE COMMAND

There are two ways to pair a Bluetooth® device to the 4" Round Touchscreen Display powered by RIDE COMMAND found on some 2022 and newer Chief models and 2023 FTR models. 

Pairing Option 1
1.
On the touchscreen display, press the App Tray button.

2. Select the PHONE button. 

3. Then tap ADD DEVICE to bring up the pairing prompt.

4. On your phone, turn Bluetooth® ON and put your device into pairing mode. 

5. On the touchscreen display, select your device.

6. Verify that the numbers on your phone match the numbers on the bike display.  

7. On your phone, select CONFIRM or PAIR to finish the pairing process. Additional prompts to sync data on your phone such as messages, contacts, etc. may appear on your device. Note: Be sure to allow the display access to your contacts and accept all other access requests if you wish to enable caller and message ID when operating the vehicle.

Pairing Option 2 
1.
Press the App Tray button. 

2. Select SETTINGS > GENERAL (settings icon) > Bluetooth® Devices.

3. Tap the Add Device button (+ Bluetooth® icon) to bring up the pairing prompt.

4. On your phone, turn Bluetooth® ON and put your device into pairing mode. 

5. On the touchscreen display, select your device.

6. Verify that the numbers on your phone match the numbers on the bike display.  

7. Select CONFIRM or PAIR on your phone to finish the pairing process. Additional prompts to sync data on your phone such as messages, contacts, etc. may appear on your device. Note: Be sure to allow the display access to your contacts and accept all other access requests if you wish to enable caller and message ID when operating the vehicle.

Forgetting a Device
To forget a device, tap the three vertical dots and select FORGET. Confirm by pressing FORGET.

Troubleshooting Tips
If you encounter issues during pairing, press the power button on the right hand control to turn off the bike. Turn the bike on and repeat this procedure. 

View the list of RIDE COMMAND-compatible devices. For information on pairing a headset, read Pairing Your SENA® headset

The RIDE COMMAND app is available on the App Store® for iPhone® and iPad®, as well as on Google Play®.
More information about RIDE COMMAND can be found in the Owner's Manual for your vehicle. 
Visit the RIDE COMMAND website to create an account and update software/maps. 
Not sure what you need? Check out the Guide to Indian Motorcycle Displays Powered by RIDE COMMAND.

Bluetooth® is a registered trademark of Bluetooth Sig, Inc.
Apple®, App Store®, Apple Watch®, AIRPLAY®, AIRDROP®, Apple CarPlay®, Siri®, iPad® and iPhone® are registered trademarks of Apple Inc.
iOS® is a registered trademark of Cisco Technology, Inc. 
YouTube®, Google®, Google Play® and Android® are registered trademarks of Google LLC

SENA® is a registered trademark of SENA Technologies, Inc. 

Unless noted, trademarks are the property of Indian Motorcycle International, LLC
© 2022 Indian Motorcycle International, LLC

Palabra (s) clave video , pair , pairing , phone , how to , ride , command , bluetooth , iphone , android , chief , ftr ,