Indian Motorcycle owners can add an accessory garage door opener (part number 2882132) to their motorcycle that allows them to open their garage by pushing a button.
The opener, made by HomeLink®, fits in a small knockout in the inner fairing and connects to the wiring harness through a plug located behind the knockout. Indian Motorcycle recommends having an Indian Motorcycle Dealer install it. To find a dealer near you, use the Dealer Locator.
Model year 2017 and newer Indian Motorcycle models are prewired for the module, and it can be programmed for most garage doors. On those motorcycles, the garage door is controlled using the buttons on the opener (pictured above). On model year 2020 and newer Ride Command displays, the HomeLink® garage door opener can be controlled from the HomeLink® buttons on the Ride Command display. It must be purchased, installed and configured separately from Ride Command. Check to make sure the opener fits your vehicle using the fitment tool.
More information on the HomeLink® garage door opener, including how to program it, can be found by reading the installation instructions.
HomeLink® is a registered trademark of Johnson Controls Technology Inc.
Unless noted, trademarks are the property of Indian Motorcycle International, LLC
© 2022 Indian Motorcycle International, LLC