Skip to content Skip to navigation Skip to footer
INDIAN MOTORCYCLE

HELP CENTER

6/9/2020
Scout Seat Removal and Installation

Scout Bobber and Scout Sixty Models, plus Model Year 2015-19 Scout Models
To remove the driver's seat:

1. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud (1).
Seat

2. Lift the seat and pull it slightly rearward to disengage the seat base from the rear retainer (2).
Seat

To install the seat:

Make sure the seat base engages the rear retainer (2) and then press downward firmly at the front edge of the seat to engage the stud to the seat base grommet. If the seat is not aligned in a straight-ahead position, the grommet is not engaged to the stud. Make sure the grommet is fully engaged to the stud before operating.

Seat

Model Year 2020 Scout Models
To remove the seat:

1. Remove the bolts on the back of the seat (1) using the included uni-tool.

Bolts diagram

2. Remove the bolt behind the seat (2) using the included uni-tool.

Bolt diagram

3. Grasp the front edge of the seat and pull upward abruptly to disengage the seat base grommet from the seat mount stud (3). 

Seat mount stud diagram

To reinstall the seat, reverse the removal process.

Scout 100th Anniversary Edition and Scout Bobber Twenty
Use caution to avoid contact with the fuel tank when removing the seat. To remove the seat:

1. Remove the two bolts (1) holding the seat to the seat frame using the incluced uni-tool.

Bolts diagram

2. Remove the four bolts (2) holding the seat frame to the bike.

Cover diagram

3. If trying to access the battery, remove the two bolts (3) holding the cover to the bike.

Bolts diagram

To reinstall the seat, reverse the removal process.

For more information about your motorcycle, consult your Owner's Manual.
For more seat options, view the full line of accessory Indian Motorcycle seats.
To find replacement parts, view the online parts catalog.